Export-Document

Exports the document in the specified format.

Syntax

Export-Document -To <String> [-Format <String>] [-Options <Hashtable | String>] [-Document <IDocument>] [-OnExport <Scriptblock | String>] [<CommonParameters>]

Parameters

Type	Name	Description	Optional
String	To	Location where the converted file should be saved	no
String	Format	File extensions:PDF, DWF / DWFX , IGES , STEP , DXF , DWG , GIF , BMP , TIFF , PNG , JPEG. If not specified a freestyleExport will be used, where you have to place your export logic in -OnExport	yes
Hashtable / String	Options	The document will be exported with the passed options, or configuration Files	yes
IDocument	Document	The cmdlet will export this document, otherwise the last opened document will be exported	yes
Scriptblock / String	OnExport	The Scriptblock or function that will be executed after collecting the options but before the real export starts	yes

Return type

Bool: on success the cmdlet returns $true otherwise $false.
$result.Error <- The result has additionally an Error property which contains the Exception object
$result.Application <- Application is an implementation of IApplication
$result.Document <- Document is an implementation of IDocument

Remarks

When passing invalid -Options the export will not fail, in that case the default settings will be used.

OnExport

For the -OnExport parameter it is either possible to pass a function name or a Scriptblock, which will be executed before the actual export starts.
Therefore the export of the document fails when an exception is thrown within this parameter.

Following parameters are available: $export, $document (=IDocument), $application (=IApplication).
Depending on the application and the output format, the export object has different types.
Independent of the type, the $export object has always following base properties:

Type	Name	Description	Access type
string	Name	The name of the export is the fromat that you pass to the cmdlet	read-only
IApplication	Application	The application which is used for the export.	read-only
IDocument	SourceDocument	The document that will be exported	read-only
IFileInfo	DestinationFile	The output location and name that was passed to the cmdlet	read-only
ExportSettings	Settings	The exporting options that are used for the export. ExportSettings.Options real HashTable entiries of -Options	read-only
HashSet<string>	SupportedDocumentTypes	Conatins all the supported input formats of the export	read-only

TranslatorAddin

Exports: PDF, DWF/DWFx, DWG, DXF, IGES, STEP,
Application: Inventor, InventorServer

Exports that are using the TranslatorAddin are working with a rich $export object, that can be manipulated in different ways.
Additional to the base properties, a TranslatorAddinExport has following properties:

Type	Name	Description	Access type
string	TranslatorName	The ID of the translator that is used. Usually this is a GUID	read-write
TranslatorAddIn	TranslatorAddin	Represents the Inventor API TranslatorAddin object. By default it is created by using the TranslatorName	read-write
TranslationContext	Context	Represents the Inventor API TranslationContext. By default a new one is created with Type IOMechanismEnum.kFileBrowseIOMechanism	read-write
Hashtable	Options	Represents the -Options that are passed to the cmldet. When passing INI files, this hash contains already it’s data. Options are only set, when HasSaveCopyAsOptions returns True	read-write
DataMedium	DataMedium	Represents the Inventor API DataMedium. By default FileName is set to the destination file from -To argument	read-write

DataIO

Exports: DWG, DXF
Application: Inventor, InventorServer

Exports that are using the DataIO are the ones for exporting SheetMetal documents.
Additional to the base properties, a SheetMetalExport has following properties:

Type	Name	Description	Access type
string	Format	The first options part for DataIO export, e.g. FLAT PATTERN DWG?…	read
SheetMetalComponentDefinition	SheetMetalComponentDefinition	Represents the Inventor API SheetMetalComponentDefinition	read-write
bool	Unfold	when set to True, the SheetMetal will be unfold. By default it is set to !HasFlatPattern	read-write
DataIO	Data	Represents the Inventor API DataIO object. It is the DataIO value of the SheetMetalComponentDefinition	read
Hashtable	Options	Represents the -Options that are passed to the cmldet. When passing INI files, this hash contains already it’s data. All the Options are formatted as this when passing to DataIO options: FLAT PATTERN DXF?AcadVersion=2000&BendLayer=IV_BEND”	read-write

SaveAs

Exports: BMP, GIF, JPEG, PNG, TIFF
Application: Inventor, InventorServer

The $export object of exports that are working with SaveAs, has only the property SaveAsCopy to configure as an bool. By default this setting is set to True.

TrueView

Exports: PDF, DWF/DWFx
Application: DWG TrueView

Exports that are using DWG TrueView as an application have in addtion to the base properties, a property DSDFile.

Type	Name	Description	Access type
FileInfo	DSDFile	This property exposes multitple properties which allow you to easy manipulate the dsd file	read-write

Examples

Exporting the last opened document to PDF with default options

Open-Document -LocalFile 'C:\Vault\AutoCad\Test.dwg'
Export-Document -format PDF -To C:\Temp\Test.pdf

Exporting with Options

Export-Document -format DXF -To C:\Temp\Test.dxf -Options C:\Temp\test.ini Export-Document -format DXF -To C:\Temp\Test.dxf -Options @{'dpi resolution'='50000px'}

Exporting multiple documents

$openPartDocument = Open-Document -LocalFile 'C:\Vault\Designs\Padlock\External\Case Back.ipt'
$openAssemblyDocument = Open-Document -LocalFile 'C:\Vault\Designs\Padlock\Assemblies\Pad Lock.iam'
Export-Document -Document $openPartDocument.Document -format JPEG -To C:\Temp\Case Back.jpg
Export-Document -Document $openAssemblyDocument.Document -format BMP -To C:\Temp\Pad Lock.bmp

Validating Export result

$result = Export-Document -format PDF -To C:\Temp\Test.pdf
if(-not $result) {
	throw "Failed to export with error: ". $result.Error.Message
}

Using the export result

$result = Export-Document -format PDF -To C:\Temp\Test.pdf if($result.Application.Name -eq 'Inventor') {
	$result.Document.Instance
	#...
}

Handling exceptions thrown in OnExport scriptBlock

$exportResult = Export-Document -Format DWF -To C:\Temp\Test.dwf -OnExport {
	#Statement throwing exception
}
if(!$exportResult -and $null -ne $exportResult.Error.InnerException) {
	Write-Host ("Exception thrown in OnExport: " + $exportResult.Error.InnerException.ErrorRecord)
}

Exporting with even more possibilities in OnExport scriptBlock

Export-Document -format PDF -To C:\Temp\Test.pdf -Options C:\Temp\PDF.ini -onExport {
	param($export)

	$export.Options['All_Color_AS_Black']='1'
	$export.Options.Remove('Password_protect')
	$export.Options.Remove('Password')
	#...
}

Doing special stuff in the OnExport, by using the Inventor API

Open-Document -LocalFile 'C:\Vault\Designs\Padlock\Assemblies\Pad Lock.iam'
$result = Export-Document -Format DWF -To C:\Temp\Test.dwf -OnExport {
	param($export)

	$document = $export.SourceDocument
	$export.Application.Instance.Visible=$true
	if($document.Instance.DocumentType -eq [Inventor.DocumentTypeEnum]::kAssemblyDocumentObject ) {
	        $export.Options['Design_Views'] = ...
	}
}

Doing special stuff in the OnExport, by manipulating the DSD for TrueView

Open-Document -LocalFile 'C:\Vault\Designs\Acad 2015\ACADE Tutorial\DEMO02.DWG'
Export-Document -Format PDF -To C:\Temp\DEMO02.DWG.pdf -OnExport {
	param($export)

	$export.DsdFile.PublishExportOptions.Type=5
}