Getting Started

Overview

powerJobs Processor is an extension to the Vault JobProcessor. This document will guide you through the first steps after the successful installation of powerJobs Processor on a Vault client machine which acts as a Job Server.

Warning

Even though powerJobs Processor can run on every machine witch a Vault client, we recommend that powerJobs Processor is installed on a dedicated machine whose purpose is to act as a Job Processor.
On the other hand powerJobs Client needs to be installed on each Vault client machine where it’s behavior is desired.

Example how to use powerJobs

Where do you find the jobs?

In the folder C:\ProgramData\coolOrange\powerJobs\Jobs there are all the sample jobs for the powerJobs Processor.

../_images/pj-gs-001-jobsfolder.png

Create your own Job to create PDFs

Rename the job Sample.CreatePDF.ps1 to Custom.CreatePDF.ps1 so your PDF job can be identified as your own job and will not be overwritten by future updates. You can modify this copied job as you please.

How to embed the Job in a Status Change

If, for example, you would like to create a PDF of drawing files (IDW and DWG) when the drawings are released in Vault, you need to do the following:

  1. Open Vault Professional and edit the Lifecycle you use for your IDW and DWG files. In the “Transitions” tab, select and edit the “Work in Progress to Released” transition

    ../_images/pj-gs-002-confistate.png

  2. In the tab “Actions” activate the option to “Synchronize Properties using Job Server” to be sure all properties will be up to date into the PDF file that powerJobs will create.

    ../_images/pj-gs-003-syncprop.png

  3. In the tab “Custom Job Types” Add a custom job type and write the name of the MyCompanyName.CreatePDF.ps1 file without the extension. Confirm with “OK” button.

    ../_images/pj-gs-004-addjob.png

Your Vault is now configured to create a PDF file from IDW and DWG files that transit from Work in Progress to Released.

Use the Job on a Lifecycle Change

  1. Select an Inventor drawing (IDW or DWG) in Vault and select command “Change State”.

  2. In the Change State dialog select the “Released” state -the state you have added the job for the transition - and press the OK button:

    ../_images/pj-gs-005-changestate.png

  3. In case you have the powerJobs Client installed you will get a Windows notification after a few seconds that the job was added to the Job Queue.

    ../_images/pj-gs-006-pjclient.png

  4. Select the command “Job Queue …” from the Tools menu to open the Job Queue.

  5. In the Job Server Queue dialog, you will now find 2 jobs in a pending state:

    • One for synchronizing the properties

    • One to publish the PDF for the drawing

  6. On the Job Server machine start powerJobs Processor from the shortcut on your desktop

    ../_images/pj-gs-007-pjicon.png

  7. Log in to your Vault:

    ../_images/pj-gs-008-login.png

  8. After powerJobs Processor started you can see how the jobs are processed:

    ../_images/pj-gs-009-pjprocessor.png

Warning

The Job Processor has a default interval of 10 min to check the job queue for new jobs.
To avoid waiting 10 min to test a job, it is possible to click File → Pause and then File → Resume in the dialog.
All queued jobs should now be processed.

Note

If you have installed powerJobs Client you will get notified if the job runs into an error. So, you will be aware if a job fails.

Result

Get back to your Vault client and refresh the UI. Beside your drawing you will find a PDF with the same name as the drawing but with pdf as an extension:

../_images/pj-gs-010-pdfattachment.png

The “Used” tab shows that the PDF is attached to the drawing.

Do you want to know more?

Tutorials

Product Documentation

  • About Jobs, what they are and how to register and queue them.

  • The Sample Jobs that come with the product.

  • How custom job scripts are created.

  • Which File Conversion are supported with per default.

  • How custom Applications can be implemented to support custom file conversions.