powerjobs_processor:jobprocessor:code_reference:cmdlets:export-document:dwg

DWG

This will export an AutoCAD dwg.

Supported files: idw, dwg
More details...

Configuration: Take the follwing ini as a submission:

DWG_2D.ini
[EXPORT SELECT OPTIONS]
Export_Acad_IniFile=C:\ProgramData\coolOrange\powerJobs\Modules\Export\DWG_2D.ini
AUTOCAD VERSION=AutoCAD 2000
CREATE AUTOCAD MECHANICAL=No
USE TRANSMITTAL=No
USE CUSTOMIZE=No
CUSTOMIZE FILE=C:\Users\Public\Documents\Autodesk\Inventor 2015\Design Data\DWG-DXF\FlatPattern.xml
CREATE LAYER GROUP=No
PARTS ONLY=No
REPLACE SPLINE=No
CHORD TOLERANCE=0.001000
[EXPORT PROPERTIES]
SELECTED PROPERTIES=
[EXPORT DESTINATION]
SPACE=Model
SCALING=Geometry
ALL SHEETS=Yes
MAPPING=MapsBest
MODEL GEOMETRY ONLY=No
EXPLODE DIMENSIONS=No
SYMBOLS ARE BLOCKED=Yes
AUTOCAD TEMPLATE=
DESTINATION DXF=No
USE ACI FOR ENTITIES AND LAYERS=No
[EXPORT LINE TYPE & LINE SCALE]
LINE TYPE FILE=C:\Users\Public\Documents\Autodesk\Inventor 2015\COMPATIBILITY\Support\invANSI.lin
Continuous=Continuous;0.
Dashed=DASHED;0.
Dashed Space=DASHED_SPACE;0.
Long Dash Dotted=LONG_DASH_DOTTED;0.
Long Dash Double Dot=LONG_DASH_DOUBLE_DOT;0.
Long Dash Triple Dot=LONG_DASH_TRIPLE_DOT;0.
Dotted=DOTTED;0.
Chain=CHAIN;0.
Double Dash Chain=DOUBLE_DASH_CHAIN;0.
Dash Double Dot=DASH_DOUBLE_DOT;0.
Dash Dot=DASH_DOT;0.
Double Dash Dot=DOUBLE_DASH_DOT;0.
Double Dash Double Dot=DOUBLE_DASH_DOUBLE_DOT;0.
Dash Triple Dot=DASH_TRIPLE_DOT;0.
Double Dash Triple Dot=DOUBLE_DASH_TRIPLE_DOT;0.
When exporting multisheet IDW or DWG files, Inventor creates foreach Sheet a own dwg file.
By setting the flag USE TRANSMITTAL to Yes, a zip file with same name as the destination dwg file will be created instead.

Supported files: iam,ipt
More details...

Configuration: Take the follwing ini as an submission:

DWG_3D.ini
[EXPORT SELECT OPTIONS]
Solid=True
Surface=True
Sketch=True
DwgVersion=23

Supported files: sheetmetal ipt
More details...

Configuration: Take the follwing ini as an submission:

DWG_SheetMetal.ini
[EXPORT SELECT OPTIONS]
AcadVersion=2000
TangentLayer=IV_TANGENT
OuterProfileLayer=Outer
ArcCentersLayer=IV_ARC_CENTERS
InteriorProfilesLayer=IV_INTERIOR_PROFILES
BendLayer=IV_BEND
BendUpLayer=IV_BEND
BendDownLayer=IV_BEND_DOWN
ToolCenterLayer=IV_TOOL_CENTER
ToolCenterUpLayer=IV_TOOL_CENTER
ToolCenterDownLayer=IV_TOOL_CENTER_DOWN
FeatureProfilesLayer=IV_FEATURE_PROFILES
FeatureProfilesUpLayer=IV_FEATURE_PROFILES
FeatureProfilesDownLayer=IV_FEATURE_PROFILES_DOWN
AltRepFrontLayer=IV_ALTREP_FRONT
AltRepBackLayer=IV_ALTREP_BACK
UnconsumedSketchesLayer=IV_UNCONSUMED_SKETCHES
TangentRollLinesLayer=IV_ROLL_TANGENT
RollLinesLayer=IV_ROLL
ExportUnconsumedSketchProperties=1
SimplifySplines=1
SplineTolerance=0.01
AdvancedLegacyExport=1
MergeProfilesIntoPolyline=0
RebaseGeometry=0
InvisibleLayers=

The full list of arguments for the DataIO addin can be found here.